PAC Audio Universal Multi Camera Switching Interface

The PAC VS41 kit includes Universal Camera interface Multi Camera Interface Harness Instruction Manual Compatibility Notes If you are using the VS41 with another PAC interface, such as a BCI-, RP4.2-, or RPA-, with an Expansion Port, simply connect the 10-pin connector into the module. Do not manually wire the positive or negative trigger wires. The BCI-RP4.2-, or RPA- module will digitally control the VS41 switching operation when connected to the Expansion Port. The VS41 video output will always default to the signal from Input 1 when none of the input triggers are activated. This Input is ideal for connecting the rear (reverse) camera. The VS41 inputs have priority in descending numerical order. For example: If you have Input 3 or 4 triggered, then you trigger a lower number input (for example Input 2), Input 2 will take priority over the higher numbered Input. The input triggers can accept either a pulsed or constant input, making them ideal for connecting to a turn signal as a trigger. The reverse trigger output will provide a 150 mA 12v ( ) trigger while any of the input triggers are activated. Upon deactivation of the last positive or negative trigger, the last video input source and the reverse trigger output will remain active for an additional 3 seconds. (Not applicable when used with a BCI-, RP4.2-, or RPA- interface). Positive Input triggers accept input voltages in the range of 2v to 12v.